How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Dodge Technician
Category: Dodge
Satisfied Customers: 11328
Experience:  24 Year Chrysler/Dodge Certified Specialist
12104952
Type Your Dodge Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

Dodge Stratus SE What is the location of the cam and crank

This answer was rated:

What is the location of the cam and crank sensor on the Dodge Stratus 2000 2.0 4 cylander and where can I get a diagram to help me replace them?
Welcome to Just Answer Dodge my name isXXXXX realize that all my answers are based solely on the info you provide me......

The crankshaft position sensor mounts to the engine block behind the generator, just above the oil filter

graphic

The camshaft position sensor is mounted to the rear of the cylinder head.

graphic
Customer: replied 5 years ago.
How do I get at them?
For the crank sensor you will need to jack the car up and get underneath, it's right above the oil filter. The cam sensor is located on the end of the head so you just need to work around the wire harness in that area and it is held in place with 4 10mm bolts.
Mopar Certified and other Dodge Specialists are ready to help you

Related Dodge Questions