How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Dodge
Satisfied Customers: 15599
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Dodge Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

dodge replace 97 dodge dakota clutch master cylinder

Resolved Question:

replace 97 dodge dakota clutch master cylinder
Submitted: 6 years ago via OnlineAutoRepair.
Category: Dodge
Expert:  Tim Mohr replied 6 years ago.
Hi, my name is XXXXX XXXXX sysytems do not have a bleeder on them, the master and slave and the line are made to be replaced as an assembly.However we have replaced the master with an aftermarket part, but you will need to remove the master and slave cylinder as an assembly, then place the master in a vise and keep the slave lower then the master, then pump the master about 1/4 inch at a time, and watch for bubbles to up throught he master resevoir, do this until the bubbles are gone, then reinstall the assembly, this is the only way to bleed these, they cant be bled on the vehicle,tim
Tim Mohr and 4 other Dodge Specialists are ready to help you