94 DAKOTA ABS AND BRAKE LIGHT ON. CODE 65 MAIN RELAY. I PUT A NEW ABS RELAY BUT I AM TRYING TO ERASE THE CODE, BUT, MY SCANNER SAY IT IS ERASED BUT THE CODE STILL THERE AND LIGHT ON.
Country: United StatesMake: DodgeModel: DAKOTAYear: 1994Engine: 3.9
have you tried a battery disconnecto to erase fault codes?
YES
I DISCONECTED FOR A FEW MINUTES ONLY
I HAVE A SNAP ON MODIS SCANNER
I TRYED TO ERASE IT WITH IT BUT I COULDN'T
usually when this happens it is a sign that the abs controller has issues,tim
DOES THE LIGHT COMES OFF BY ITSELF WHEN THE PROBLEM IS FIXED.
yes-- everytime you cycle the key on and off -- a self check is done -- if problem is gone a key cycle will reset the light,tim
WHAT COULD BE THE PROBLEM. THATS THE ONLY CODE I GET CODE 65
we either have a wiring issue -- or more apt to be the controller itself
DO YOU HAVE A WIRING DIAGRAM /
IS THERE ANOTHER RELAY INTEGRATED IN THE MODULE?
IS THIS CODE REFERING TO THE ABS RELAY OR OTHER RELAY?
Experience: DODGE SERVICE MANAGER- 20 + YEARS
this code is referring to the abs module -- internal to the module--- check the wiring to the module itself looking for any breaks or corrosion -- usually at the plug ins -- if none then i suspect module failure
do you have a picture of the abs module for this truck? i was looking for one. but the ones i found at the autoparts look different then the one on my truck. please let me know. thank you.
sorry i do not have a picture of this on the older models-- this module is apporx 5"x4" inches