How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Dodge
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Dodge Question Here...
brownjeff is online now
A new question is answered every 9 seconds

Dodge RAM 2500 4x4 how do you remove oilpan on 5.9 liter

Resolved Question:

how do you remove oilpan on 5.9 liter deisal
Submitted: 5 years ago.
Category: Dodge
Expert:  brownjeff replied 5 years ago.
Hello and Welcome to JustAnswer,

My name is XXXXX XXXXX I am here to try and assist your with your question. Here are the steps to remove the pan



  1. Open the hood.
  2. Disconnect the battery negative cables.
  3. Remove the intake air assembly.
  4. Remove the radiator shroud retaining bolts.
  5. Install engine support fixture.
  6. Raise and support the vehicle.


  1. Drain the engine oil.
  2. Loosen the front engine mount bolts.
  3. Lower the vehicle.
  4. Use the engine support fixture to raise engine out of the front mounts.
  5. Remove the engine oil dipstick.
  6. Raise and support the vehicle.
  7. Remove oil pan bolts, break the pan to block seal, and lower pan slightly and remove oil suction tube fasteners.
  8. Remove oil pan and suction tube.
  9. Remove the 2 bolts from the front of the engine block stiffener.
  10. Remove the oil pan.
brownjeff and 4 other Dodge Specialists are ready to help you