How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 18114
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
18617752
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Where is location camshaft position sensor dodge stratus 2.

This answer was rated:

where is location camshaft position sensor dodge stratus 2.4l 1997

The camshaft position sensor is mounted to the cylinder head, on the driver's side of the engine.

graphic

 

graphic

 

 

  1. Disconnect the filtered air tube from the throttle body and air cleaner housing.
  2. Remove air cleaner inlet tube.
  3. Disconnect electrical connectors from engine coolant sensor and camshaft position sensor.
  4. Remove camshaft position sensor mounting screws. Remove sensor.

 



Edited by DriveFast71 on 11/14/2010 at 10:11 PM EST
  1. Disconnect the filtered air tube from the throttle body and air cleaner housing.
  2. Remove air cleaner inlet tube.
  3. Disconnect electrical connectors from engine coolant sensor and camshaft position sensor.
  4. Remove camshaft position sensor mounting screws. Remove sensor.

 


graphic
Ron Z. and 3 other Dodge Specialists are ready to help you