How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21818
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Torque specs for a 2003 dodge caravan intake manifold 3.3 lt engine.

This answer was rated:

I need torque specs for a 2003 dodge caravan intake manifold 3.3 lt engine.

Hello and welcome to JustAnswer!


The torque for the lower intake gasket bolts (at the ends of the gasket) is 105 in lbs.


The lower intake-to head bolts are 10 in lbs, and then 200 in lbs. After torquing to 200 in lbs then go back around at 200 in lbs again and make sure they are still tight.


The plenum bolts torque to 105 in lbs.

sprinkles08 and other Dodge Specialists are ready to help you
Customer: replied 6 years ago.
Thank yOu for your help

You're welcome, and good luck!