How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask jeepmopar76 Your Own Question
jeepmopar76, Dodge/Chrysler Triple Master Tech
Category: Dodge
Satisfied Customers: 2144
Experience:  32 yr ASE Master Tech,9 yr Chrysler Master Tech, 13 years Dodge dealership service
Type Your Dodge Question Here...
jeepmopar76 is online now
A new question is answered every 9 seconds

Dodge Ram 2500: I fix a po 734 Code Problem..Diesel Truck

Customer Question

How do I fix a PO 734 Code Problem in my Dodge Ram 2500 Diesel Truck Transmission?
Submitted: 6 years ago.
Category: Dodge
Expert:  jeepmopar76 replied 6 years ago.
P0734 is ''gear ratio error in 4th''; this is due to tranny slipping. If this is the only code, then your problem is limited to 4th gear. Even so, the tranny will have to come out and apart, to fix this problem. ( make sure you check you fluid level; there is a slim chance you could get this code from a low fluid level condition.
Customer: replied 6 years ago.
I was also getting an error code of PO 700 that I assumed was caused by the first code.
Expert:  jeepmopar76 replied 6 years ago.
yes P0700 is a code in the PCM, telling you their are tranny codes present

Related Dodge Questions