How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Dodge
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Dodge Question Here...
brownjeff is online now
A new question is answered every 9 seconds

97 dodge: 4x4 p/u governor pressure sensor voltage to low

Resolved Question:

97 dodge ram 4x4 p/u governor pressure sensor voltage to low how can you repair that and if you take it some where how much sould it costand how hard of a job is it
Submitted: 6 years ago.
Category: Dodge
Expert:  brownjeff replied 6 years ago.

Typically this is just replacing the sensor and solenoid in the valve body and will take about 1 1/2 hours to replace.


Don't have the exact price but think the sensor and solenoid run about $60.00 each

brownjeff and 2 other Dodge Specialists are ready to help you