How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 17792
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

crank sensor location 5.9L dodge ram 1500

Resolved Question:

crank sensor location 5.9L dodge ram 1500
Submitted: 6 years ago.
Category: Dodge
Expert:  Ron Z. replied 6 years ago.


The sensor is bolted to the top of the cylinder block near the rear of right cylinder head.


  • Raise vehicle.
  • Disconnect crankshaft position sensor pigtail harness from main wiring harness.
  • Remove two sensor (recessed hex head) mounting bolts.
  • Remove sensor from engine.
Ron Z. and other Dodge Specialists are ready to help you

Related Dodge Questions