How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 17799
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Need To Replace Dakota Blower Motor Resistor.

Resolved Question:

How to replace a 2002 Dodge Dakota blower motor resistor?

Submitted: 6 years ago.
Category: Dodge
Expert:  Ron Z. replied 6 years ago.


  • Disconnect and isolate the battery negative cable.
  • From the passenger foot well area, remove the two hex screws used to secure the blower motor resistor.
  • Unplug the front blower motor resistor from the wire harness connector.
  • Remove the front blower motor resistor from the HVAC unit.


Ron Z. and other Dodge Specialists are ready to help you