How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Technician
Category: Dodge
Satisfied Customers: 12719
Experience:  ASE Master Tech, 32 years Diag/Electrical Specialist
Type Your Dodge Question Here...
Randall C is online now
A new question is answered every 9 seconds

engine wiring diagrams for a 96 and 98 dodge ram 1500

Customer Question

I have a 96 dodge that needed a new engine harness and I could only find a 98 one, and noticed the plugs that go inot the computer area are different. Can I make an adapter using a plug from both and match up the wires to each proper location and it work?
Submitted: 7 years ago.
Category: Dodge
Expert:  Randall C replied 7 years ago.
Hello, do you have the original plugs from the original harness?
Customer: replied 7 years ago.
yes i have all original plugs for both
Expert:  Randall C replied 7 years ago.
Thanks. i did need to ask what sive or series vehicle. What engine size etc. I will do my best to send diagrams to you can direct wires back to the original ecam from new harness but need more vehicle information to give accurate info. LMK thanks
Customer: replied 7 years ago.
It is a 5.9L 4x4 ... I wish i could have just got a new one but dodge told me it is discontinue for 96 so that stinks :)
Customer: replied 7 years ago.
Expert:  Randall C replied 7 years ago.

This is a tricky task. I am starting with info below. it shows the 3 connectors, their colors and the numbers for each terminal. the chart after that shows each wire color and wher from. ther are no adapters offered for this. You can try to slowly splice one at a time or maybe locate one at salvage yard. LMK thanks





A1K32 YL/GY Ignition Coil Driver #4
A2F18 LG/BK Fused Ignition Switch Output
A3K18 RD/BK Ignition Coil Driver #3
A4K4 BK/LB Sensor Ground
A5K43 DG/GY Ignition Coil Driver #5
A6T41 BK/WT P/N Position Switch Sense
A7K19 8K/GY Ignition Coil Driver #1
A8K24 GY/BK Crank Position Sensor Signal
A9K17 DB/WT Ignition Coil Driver #2
A10K60 YL/BK Idle Air Control #2 Driver
A11K40 BR/WT Idle Air Control #3 Driver
A15K21 BK/RD Intake Air Temp. Sensor Signal
A16K2 TN/BK ECT Sensor Signal
A17K6 VT/WT 5-Volt Supply
A18K44 TN/YL Camshaft Position Sensor Signal
A19K39 GY/RD Idle Air Control #1 Driver
A20K59 VT/BK Idle Air Control #4 Driver
A22A14 RD/WT Fused B(+)
A23K22 OR/DB Throttle Position Sensor Signal
A24K141 TN/WT Upstream O2 Sensor Signal
A24K41 BK/DG Upstream O2 Sensor Signal
A25K341 OR/BK Downstream O2 Sensor Signal
A26K41 BK/DG Right Upstream O2 Sensor Signal
A26K241 BK/DG Right Upstream O2 Sensor Signal
A27K1 DG/RD MAP Sensor Signal
A28K242 DG/LB Fuel Pressure Sensor Signal
A29K441 TN/RD Center O2 Sensor Signal
A31Z12 BK/TN Ground
A32Z12 BK/TN Ground
B1K54 VT Trans. Temp. Sensor Signal
B2K26 VT/TN Injector #7 Driver
B3K115 TN Injector #9 Driver
B4K11 WT/DB Injector #1 Driver
B5K13 YL/WT Injector #3 Driver
B6K38 GY Injector #5 Driver
B8K88 VT/WT Governor Pressure Solenoid Control
B10K20 DG Generator Field Driver
B11K54 OR/BK TCC Solenoid Control
B12K58 BR/DB Injector #6 Driver
B13K28 GY/LB Injector #8 Driver
B14K116 WT/DB Injector #10 Driver
B15K12 TN Injector #2 Driver
B16K14 LB/BR Injector #4 Driver
B21T60 BR Solenoid Control 3-4 Shift
B22K221 TN/PK Fuel Temp Sensor Signal
B25T13 DB/BK Output Shaft Speed Sensor Ground
B27G7 WT/OR Vehicle Speed Sensor Signal
B28T14 LG/BK Output Shaft Speed Sensor Signal
B29T25 LG/WT Governor Pressure Signal
B30K30 PK Transmission Relay Control
B31K7 OR 5-Volt Supply
B32K35 GY/YL EGR Solenoid Control
C1C13 DB/OR A/C Comp. Clutch Relay Control
C3K51 DB/YL Auto Shutdown Relay Control
C4V36 TN/RD S/C Vacuum Solenoid Control
C5V35 LG/RD S/C Vent Solenoid Control
C6T18 LG/OR Overdrive Off Lamp Driver
C7G14 PK/BK Trans Temp. Lamp Driver
C11V32 YL/RD 12 Volt Supply
C12A142 DG/OR Auto Shutdown Relay Output
C13T6 OR/WT Overdrive Off Switch Sense
C15K118 PK/YL Battery Temp. Sensor Signal
C16G12 TN/YL Generator Lamp Driver
C17G3 BK/PK MIL (Check Engine) Lamp Driver
C18G24 GY/PK Service Reminder Indicator Driver
C19K31 BR/WT Fuel Pump Relay Control
C20K52 PK Evaporative Emission Solenoid Control
C22C20 BR A/C Request Signal
C23C90 LG A/C Select Signal
C24V40 WT/PK Brake Switch Sense
C26K226 DB/WT Low Fuel Sense
C27D21 PK/DB SCI Transmit
C29D20 OG SCI Receive
C31G21 GY/LB Tachometer Signal
C32V37 RD/LG Speed Control Switch Signal


Customer: replied 7 years ago.
are these on the computer side or body harness side. I am looking to take the harness I have off a 98 and make an adapter using the plug off the 96 harness so it will plug in to the body control harness which has 3 plugs on the upper left side of firewall. The one off the 98 only has one plug.
Customer: replied 7 years ago.
therefore I need the diagrams and wire/color functions for both 96 and 98 to match them up properly
Expert:  Randall C replied 7 years ago.

Below is the plug view for 1998 and pinout. I am unsure as both use 3 plugs. This is the best I have to offer. It would be an enormous task to send all the diagrams for both years as there are many,many diagrams. lmk thanks





Customer: replied 7 years ago.
ok let me see what i can do with the above diagrahm.
Customer: replied 7 years ago.
i need the side bythe fuse box, not the computer.
Expert:  Randall C replied 7 years ago.
So you need the wiring diagrams for the wires going into the underhood fuse box
Customer: replied 7 years ago.
i got some diagrams from dodge today, so now all i need is this

for the 1998 1500 5.9L 4x4 one and I can match all up from there.
Expert:  Randall C replied 7 years ago.
I sent the one fior the 96 and then the one for 98 . They are very similar. It was the last diagram I sent was the 98
Customer: replied 7 years ago.
ok, sorry I thought both were same.
Customer: replied 7 years ago.
are you certain as both wire color/fnuction listings are identical, and I know they are not 100% identical from the sheet I got from dodge's service manual.
Expert:  Randall C replied 7 years ago.
I have not looked ar each and every one but I did oull the connector views form both different years
Customer: replied 7 years ago.
Relist: not understanding question.
not understanding question
Customer: replied 7 years ago.
I need this diagrahm for 1998 and 1996 Dodge Ram 1500 4x4 (needs to show ckt/color and function for both) otherwise I cannot match up wires.

Related Dodge Questions