How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rich Your Own Question
rich, ASE Certified Technician
Category: Dodge
Satisfied Customers: 368
Experience:  19 years at chrysler-dodge-jeep dealer
Type Your Dodge Question Here...
rich is online now
A new question is answered every 9 seconds

1996 dodge ram 1500: 5.9L..put a new engin and i put the oil filter

Customer Question

i have a 1996 dodge ram 1500 5.9L 4x4.I just put a new engin and i put the oil filter on but it did not cover the return hole. and it through oil all over.
Submitted: 7 years ago.
Category: Dodge
Expert:  rich replied 7 years ago.
di you put in a new engine or a salvage engine and what oil filter are you using
Customer: replied 7 years ago.

It is a reman engin from part store. oil filter part # XXXXX

Customer: replied 7 years ago.
hi rich. i put a reman engin in a 1996 dodge ram 1500 4x4 5.9 Litter. I went to put on the oil filter and i tried to start the engin and oil was falling out the side of the filter. It did not cover the return hole on the block. I thaught it was the wrong filter but the part store said it was the right one.part # XXXXX
Expert:  rich replied 7 years ago.
did you put the oil filter mounting plate in under the screw--it looks like a flat piece of steel and is about 4 inches across

Related Dodge Questions