How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 18114
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

2000 dodge durango 4.7 oil pump replacement diagram

Customer Question

2000 dodge durango 4.7 oil pump replacement diagram
Submitted: 7 years ago.
Category: Dodge
Expert:  Ron Z. replied 7 years ago.


  1. Remove the oil pan and pick-up tube.
  2. Remove the timing chain cover.
  3. Remove the timing chains and tensioners.
  4. Remove the four bolts, primary timing chain tensioner and the oil pump.



  1. Position the oil pump onto the crankshaft and install two oil pump retaining bolts.
  2. Position the primary timing chain tensioner and install the two retaining bolts.
  3. Tighten the oil pump and primary timing chain tensioner retaining bolts to 28 Nm (250 in. lbs.) in the sequence shown
  4. Install the secondary timing chain tensioners and timing chains.
  5. Install the timing chain cover.
  6. Install the pick-up tube and oil pan


Related Dodge Questions