How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask TIM Your Own Question
TIM
TIM, SERVICE MANAGER
Category: Dodge
Satisfied Customers: 6177
Experience:  DODGE SERVICE MANAGER- 20 + YEARS
6531745
Type Your Dodge Question Here...
TIM is online now
A new question is answered every 9 seconds

How do I change the Oil Pressure Sending Unit on a 2006 Dodge Charger

Resolved Question:

How do I change the Oil Pressure Sending Unit on a 2006 Dodge Charger
Submitted: 7 years ago.
Category: Dodge
Expert:  TIM replied 7 years ago.
hello, what size engine do you have?tim
Expert:  TIM replied 7 years ago.

if it is a v6 here you go,tim

REMOVAL


1.Raise vehicle on hoist.
2.Position an oil collecting container under switch location.
3.Disconnect electrical connector.
4.Unscrew oil pressure switch (1) .

TIM and 3 other Dodge Specialists are ready to help you