How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Dodge Technician
Category: Dodge
Satisfied Customers: 11328
Experience:  24 Year Chrysler/Dodge Certified Specialist
Type Your Dodge Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

2000 Dodge Dakota SLT: I remove the door panel..power windows..stereo

Resolved Question:

How do I remove the door panel on a 2000 Dodge Dakota SLT , with power windows, so I can replace the stereo speaker?
Submitted: 7 years ago.
Category: Dodge
Expert:  Mopar Certified replied 7 years ago.


  1. Release door latch and open door.
  2. Roll window down.
  3. Remove window crank , if equipped.
  4. Remove screws attaching trim panel to door

    CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

  5. Simultaneously lift upward and outward to release retainer steps from inner door panel
  6. Disengage inside handle linkage rod from inside handle.
  7. Disconnect speaker harness wire connectorDisengage power mirror wire connector, if equipped (driver's side only)
  8. Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped Separate door trim panel from vehicle




Mopar Certified and 3 other Dodge Specialists are ready to help you

Related Dodge Questions