How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Dodge
Satisfied Customers: 20529
Experience:  Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Dodge Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Where is my map sensor located on my 2002 dodge 1500 ram 4.7

Resolved Question:

Where is my map sensor located on my 2002 dodge 1500 ram 4.7 and how can I identify it?
Submitted: 8 years ago.
Category: Dodge
Expert:  Don 'Mo Lurch' replied 8 years ago.

The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold with 2 screws.

 

graphic

 

graphic

Customer: replied 8 years ago.
I need to know which wire goes to battery and which goes to the ECM from the map sensor. There is an orange wire, a black wire with blue stripe which I think is the ground, and a green with a red stripe.
Expert:  Don 'Mo Lurch' replied 8 years ago.

Thanks for the new info.........

Carefully examine wires, should be a Dark Green / Red, Black / Light Blue & Red wires.

Dark Green / Red is Computer Signal:

 

 

graphic

Don 'Mo Lurch' and other Dodge Specialists are ready to help you