How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21410
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

How to remove alternator from 2002 dodge intrepid?

Resolved Question:

how to remove alternator from 2002 dodge intrepid?
Submitted: 8 years ago.
Category: Dodge
Expert:  sprinkles08 replied 8 years ago.
Hi. Which engine is in your Intrepid? If you have already given this I'm sorry for asking again, but some information comes through slow sometimes. I'll see it shortly.
Customer: replied 8 years ago.
Expert:  sprinkles08 replied 8 years ago.



  1. Disconnect negative battery cable.
  2. Raise and support vehicle.
  3. Remove lower plastic splash shield.
  4. Remove transmission cooler and reposition cooler out of the way.
  5. Remove lower radiator crossmember support and position a jackstand under radiator for support.
  6. Loosen adjusting T-bolt, but do not remove.
  7. Loosen pivot bolt, but do not remove.
  8. Remove the generator drive belt.
  9. Disconnect the generator field circuit plug.
  10. Remove the B+ terminal nut and wire.
  11. Remove pivot bolt, being careful not to lose spacer.
  12. Remove generator.


  1. Install generator.
  2. Install pivot bolt, leave loose.
  3. Connect the generator field circuit plug.
  4. Install the B+ terminal nut and wire.
  5. Install the generator drive belt.
  6. Adjusting T-bolt and tighten belt.
  7. Remove jackstand from under radiator and install lower radiator crossmember support.
  8. Reposition transmission cooler and tighten fasteners.
  9. Install lower plastic splash shield.
  10. Lower vehicle.
  11. Connect negative battery cable.


sprinkles08 and 3 other Dodge Specialists are ready to help you