How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask brownjeff Your Own Question
brownjeff, ASE Certified Technician
Category: Dodge
Satisfied Customers: 13886
Experience:  17 years experience, ASE certified, dealership certified, Service Manager for 15 years,
Type Your Dodge Question Here...
brownjeff is online now
A new question is answered every 9 seconds

How to remove factory radio on a 2004 durango

Resolved Question:

how to remove factory radio on a 2004 durango
Submitted: 8 years ago.
Category: Dodge
Expert:  brownjeff replied 8 years ago.

I will attach instructions. If you still need help just reply, if not click ACCEPT when we are done.








  1. Before proceeding with the following repair procedure, review all warnings and cautions.
  2. Remove the two screws (2) and remove the bezel (1).

  3. Disconnect the electrical connectors and remove the bezel.



  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel (see above)
  3. Remove the radio mounting fasteners.

    CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

  4. Disconnect the antenna cable (3) by pulling the locking antenna connector (2) away from the radio (1).
  5. Disconnect the electrical harness connector and remove radio.


brownjeff and 2 other Dodge Specialists are ready to help you

Related Dodge Questions