Good afternoon. Here is the info you requested. I recommend using 5w-30 engine oil due to being the best overall for temperature reasons.
DESCRIPTION - ENGINE OIL AND LUBRICANTS
WARNING: NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID PROLONGED OR REPEATED SKIN CONTACT WITH ENGINE OIL. CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTERNAL COMBUSTION, CAN BE HAZARDOUS TO YOUR HEALTH. THOROUGHLY WASH EXPOSED SKIN WITH SOAP AND WATER. DO NOT WASH SKIN WITH GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS, HEALTH PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE OF USED ENGINE OIL PROPERLY. CONTACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION CENTER IN YOUR AREA.
When service is required, DaimlerChrysler Corporation recommends that only Mopar® brand parts, lubricants and chemicals be used. Mopar® provides the best engineered products for servicing DaimlerChrysler Corporation vehicles.
Only lubricants bearing designations defined by the following organization should be used.
- Society of Automotive Engineers (SAE)
- American Petroleum Institute (API)
- National Lubricating Grease Institute (NLGI)
API SERVICE GRADE CERTIFIED
Use an engine oil that is API Certified. MOPAR® provides engine oils, meeting Material Standard MS-6395, that meet or exceed this requirement.
An SAE viscosity grade is used to specify the viscosity of engine oil. Use only engine oils with multiple viscosities such as 5W-30 or 10W-30. These are specified with a dual SAE viscosity grade which indicates the cold-to-hot temperature viscosity range. Select an engine oil that is best suited to your particular temperature range and variation.
ENERGY CONSERVING OIL
An Energy Conserving type oil is recommended for gasoline engines. The designation of ENERGY CONSERVING is located on the label of an engine oil container.
Standard engine oil identification notations have been adopted to aid in the proper selection of engine oil. The identifying notations are located on the front label of engine oil plastic bottles and the top of engine oil cans.
This symbol means that the oil has been certified by the American Petroleum Institute (API). DiamlerChrysler only recommend API Certified engine oils that meet the requirements of Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395.
As far as the amount of oil, 4.5 qts.
SPECIFICATIONS - FLUID CAPACITIES
|Fuel Tank ||47.5 L (12.5 gal.) |
|Engine Oil* - 1.6 L ||4.5 L (4.8 qts.) |
|Engine Oil* - 2.0 L ||4.3 L (4.5 qts.) |
|Cooling System** ||6.2 L (6.5 qts.) |
|Automatic Transaxle - Estimated Service Fill ||3.8 L (4.0 qts.) |
|Automatic Transaxle - Overhaul Fill Capacity with Torque Converter Empty ||8.1 L (8.6 qts.) |
|Manual Transaxle - NV T350 ||2.4 - 2.7 L (2.5 - 2.8 qts.) |
|*(includes new filter) |
|**(includes heater and recovery/reserve bottle) |
Let me know if you need further help or have more questions.