How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Dodge
Satisfied Customers: 20798
Experience:  Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Dodge Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

how do i reset my factory alarm on my 1999 dodge durango

Customer Question

No Comment Added
Submitted: 10 years ago.
Category: Dodge
Expert:  Don 'Mo Lurch' replied 10 years ago.
Should be able to Reset with the Door Lock Cylinder.
Insert Door Key & Turn to Lock then Unlock.

You can Reset with the Remote by Unlock Button

Open Driver Door.
Disconnect Positive Battery Cable.
Turn Ignition ON
Reconnect Positive Battery Cable.
Customer: replied 10 years ago.
it still isn't starting what should i do
Expert:  Don 'Mo Lurch' replied 10 years ago.
Does it Crank?
Customer: replied 10 years ago.
no, it tries but doesn't turn over. it acts as if its out of gas but it has a full tank.
Expert:  Don 'Mo Lurch' replied 10 years ago.

Is the Alarm still triggering or do you have Security or Check Engine Light ON?

Customer: replied 10 years ago.
the security light is on
Expert:  Don 'Mo Lurch' replied 10 years ago.


Lock all Doors & leave alone for at least 10 Minutes.
Unlock Driver Door with Key.
If the Alarm still Triggers, then try the Battery Disconnect procedure.
Otherwise the Security System may have a problem (not unusual)
& you may have to have the Dealer Scan the System which is Part of the CTM

Related Dodge Questions