How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Dodge
Satisfied Customers: 20444
Experience:  Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Dodge Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

how do i hard wire a neon light in my car on a

Customer Question

how do i 'hard wire' a neon light in my car on a switch,with out using the smoke lighter?
Submitted: 10 years ago.
Category: Dodge
Expert:  Don 'Mo Lurch' replied 10 years ago.
First check the Amp rating of the Neon.
O.K. way:
You would obtain a Switch for a little more than the Amp rating.   Wire one side of switch to 12 Volts +. The other side of switch to + of Neon. Negative side of Neon to GROUND.

Better way:
1 Switch & 1 SPDT Relay
( single Pole double Throw )
You could also use a Relay & Switch. One side of switch goes to Ground. Other side of Switch goes to PIN 86 on Relay. PIN 85 & 30 of Relay goes to 12 Volts +. PIN 87 goes to + side of Neon. Other side of Neon Goes to GROUND

Related Dodge Questions