How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1149
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2002 new Holland ls 180 we put in all new pump

Customer Question

I have a 2002 new Holland ls 180 we put in all new pump drive gears old gears bad new servo shafts machine raises and tilts on bucket but no oil to sero motors it will not travel
Submitted: 1 month ago.
Category: Construction and Road Equipment
Expert:  Dan replied 1 month ago.

Hi my name is***** will be glad to try to help. what is your serial number and have you tested the actual pressures yet?

Customer: replied 1 month ago.
There is no oil going to drive motors
Expert:  Dan replied 1 month ago.

Let me get some more detail on the work done to get up to speed more. The pump drive between the engine and the pump was replaced. Did you have the hydrostatic drive pump and motors apart? If so was this done at a hydraulic shop and recalibrated on a test stand?

Related Construction and Road Equipment Questions