How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cat Man Your Own Question
Cat Man
Cat Man, Cat Engine Expert
Category: Construction and Road Equipment
Satisfied Customers: 8566
Experience:  I am ASE Master Certified.
30708357
Type Your Construction and Road Equipment Question Here...
Cat Man is online now
A new question is answered every 9 seconds

I got this 6NZ at my shop For sealing the front gear housing

This answer was rated:

Hello
I got this 6NZ at my shop
For sealing the front gear housing
Can u send me full instruction manual for that
Thanks for asking your question. I will try and help you out.
Resealing the front gear housing is not a very difficult job. The biggest issue is there is a special tool needed to install the front crankshaft seal. The rest is pretty much unbolt and rebuilt.
Unfortunately I do not have a manual I can send. Sorry.
The 3/8 bolts on the front cover torque to 35 foot pounds.
The front motor mount bolts torque to 75 foot pounds.
The dampener bolts torque to 160 foot pounds.Please reply back if you need more help or have more questions. I am happy to assist.
Customer: replied 1 month ago.
Can u tell me cam gear holding bolts
Customer: replied 1 month ago.
Torque
Sure. The cam gear bolts torque to 175 foot pounds.
Customer: replied 1 month ago.
Can u give me part number for front seal tool
Customer: replied 1 month ago.
Is there any other way to install seal as u have worked in field
Unfortunately not. Any time I have seen folks try to install the seal without the tool. The seal leaked oil. I am sorry. The bad news is the tool is very expensive.Please reply back if you need more help or have more questions. I am happy to assist.
Customer: replied 1 month ago.
What Is torque for rockers
The rockers and jakes all torque to 80 foot pounds.
Cat Man and other Construction and Road Equipment Specialists are ready to help you

Related Construction and Road Equipment Questions