How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 4373
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
65405794
Type Your Construction and Road Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

873 bobcat with hand controls code 32-40, 873gbeen to bobcat

Customer Question

873 bobcat with hand controls code 32-40
JA: What is the complete model and serial number of your machine?
Customer: 873g###-##-####been to bobcat 3 times now with varying success
JA: Are you fixing this yourself? What have you tried so far?
Customer: has new hand controls so far machine only has 820 hours on it
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: will operate perfect for several hours then goes into frenzy with this code if you operate both handles at the same time
Submitted: 21 days ago.
Category: Construction and Road Equipment
Expert:  Dan replied 19 days ago.

Hi my name is***** will be glad to help if you still need help.

Expert:  Dan replied 19 days ago.

32-40 either the Lift or the Tilt Pedal or Handle is not in neutral. Check the pedal and joystick as well as the wiring for problems. If okay try re-calibration and see if the problem resolves. Let me know.

Customer: replied 18 days ago.
has new AHC controls installed at bobcat -works great for couple hours (sometimes) then starts throwing codes 32-34 32-40 for no reason without stopping or raising seat bar- sometimes after starting and stopping machine several times will work fine again- sometimes won't reset at all till it gets in the mood THANKS-JEFF
Expert:  Dan replied 18 days ago.

Thanks for the update. Try recalibration after thoroughly inspecting the wiring harness for damage and if the problem persists then try swapping actuators ans recalibrate to see if the problem moves or reveals a faulty actuator. 32-34 is Lift/Tilt valve not calibrated. Let me know

Related Construction and Road Equipment Questions