How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26016
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Case 95xt, the lift hydraulics are very slow and

Customer Question

I have a Case 95xt, the lift hydraulics are very slow and don't seem to lift what they should. Is there a way to adjust the hydraulic pressure to the lift?
Submitted: 1 month ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 month ago.

Hello! Let's see if we can work together and come to a satisfactory conclusion!

Customer: replied 1 month ago.
Sounds good
Expert:  Curtis B. replied 1 month ago.

See the attached link below. # 1 is the main relief valve and is what has to be changed or adjusted , to raise the hydraulic pressure. You need to install pressure gage in the control valve and check pressure, and if the pressure does not rise when spring pressure is increased, the hydraulc pump may be bad, and before a new pump is installed, the relief valve needs to be reset to the old setting , to keep from damaging new pump.

Customer: replied 1 month ago.
Thanks, ***** ***** round up a pressure gauge and give that a try this weekend
Expert:  Curtis B. replied 1 month ago.

> Thanks.

Related Construction and Road Equipment Questions