How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85, Technician
Category: Construction and Road Equipment
Satisfied Customers: 488
Experience:  Service amanger for over 15 years
Type Your Construction and Road Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have a new holland skid steer and the hydraulic petals are

Customer Question

I have a new holland skid steer and the hydraulic petals are locked and the seat belt and parking light are blinking , I'm wondering what's wrong
JA: What is the complete model and serial number of your machine?
Customer: I know that's is a LX 565 , don't know the serial number
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: No
Submitted: 22 days ago.
Category: Construction and Road Equipment
Expert:  dd85 replied 22 days ago.

1. When you first set in the seat does the Instrument cluster light up?

2. When you fasten the seat belt does the seat belt light go off? The seat belt light must not be left fastened all the time.

if the Instrument cluster lights up the seat switches are okay, if not you have a bad seat switch or wiring loose.

if when the seat belt is fastened then you have a bad seat belt switch.

You must replace the seat belt to correct.

Customer: replied 22 days ago.
When I sit in the seat the instrument light light up , but when I connect the seat belt in the seat belt buckle the seat belt light blinks
Expert:  dd85 replied 22 days ago.

Okay your seat switches are okay.

It must be the seat belt switch. which is in the seat belt latch,

Expert:  dd85 replied 22 days ago.

I have attached wiring diagrams.

Expert:  dd85 replied 20 days ago.

I thought of something else.

At the top of the right window there is a cover for the Service / Ruun switch.

Make sure it is in the Run position.

If in Service it will move only no pedal movement.

Related Construction and Road Equipment Questions