How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dieseldan55 Your Own Question
dieseldan55
dieseldan55, Mechanic
Category: Construction and Road Equipment
Satisfied Customers: 750
Experience:  Road Mechanic for Volvo Construction Equipment.
11640745
Type Your Construction and Road Equipment Question Here...
dieseldan55 is online now
A new question is answered every 9 seconds

How do I adjust the auxillary hydraulic pressure on a

Customer Question

How do I adjust the auxillary hydraulic pressure on a PC210-8. I need to bring it down from 3400 psi to 2600 psi
Submitted: 7 months ago.
Category: Construction and Road Equipment
Expert:  dieseldan55 replied 7 months ago.

I have access to Komatsu website , I will take a look to see if they show how to.

Expert:  dieseldan55 replied 7 months ago.

this is info on how to get into the service mode and then I found info on turning attachment on then the two pump settings. Hope that is what your looking for.,

Expert:  dieseldan55 replied 7 months ago.

if there is something else I will try to locate there terminology is different than Volvo. Thanks, Dan

Related Construction and Road Equipment Questions