How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 27039
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

The battery fluid light and beeper started coming on in my

Customer Question

The battery fluid light and beeper started coming on in my tl26 loader, checked an put a small amount of water in battery even thou it wasn't low. Beeper and light stopped for about 10 minutes then came back on. What should I do
Submitted: 8 months ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 8 months ago.

With battery water sensor, it has to be on the battery. Did you check the sensor for corrosion onthe wires to it? On battery, it is subject to damage from the battery acid.

Related Construction and Road Equipment Questions