How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26017
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have an 06 t300 bobcat that the lift pedal is hard to push

Customer Question

I have an 06 t300 bobcat that the lift pedal is hard to push up or down. i have checked and greased all mechanical joints. the problem seams to be in the valve.
Submitted: 3 months ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 3 months ago.

On the control valve, opposite end fro the linkage is a cover with the return spring and retainers. Take off this cover and see if it is full of rust or has broken spring. Most valve sticking problems is caused by water getting into this cover.

Customer: replied 3 months ago.
Have cab tilted need to wait until tomorrow to see. How do I contact u tomorrow afternoon?
Expert:  Curtis B. replied 3 months ago.

There should be a link in your email to get back to here!

Customer: replied 3 months ago.
Got it thanks
Expert:  Curtis B. replied 3 months ago.

Thanks

Customer: replied 3 months ago.
I am sorry I did not have time to work on my t300 today. I will get back with you I hope tomorrow evening.
G E Barker
Expert:  Curtis B. replied 3 months ago.

OK>Thanks

Related Construction and Road Equipment Questions