How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 989
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

2006 842c turbo. Arm raises but unit will not move. Low

Customer Question

2006 842c turbo. Arm raises but unit will not move. Low pressure light was on. Added fluid. Still won't move
Submitted: 4 months ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 4 months ago.

Check the limit switch on the back of the boom if it is stuck or bad it will kick the transmission out of gear.

Related Construction and Road Equipment Questions