How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26035
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My case 1845c won't move apick and the boom won't work, The

Customer Question

My case 1845c won't move apick and the boom won't work
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: The boom and the wheels won't move
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: No just that I just had the tantrum pump rebuilt it only has mabe 20 hours on it
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 5 months ago.

Are the pumps turning, or could the plate between engine and pump be stripped out? Do you get any oil flowing if you loosen a line on the pump pressure side?

Expert:  Curtis B. replied 5 months ago.

Did you find the problem?

Related Construction and Road Equipment Questions