How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 989
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Trying to change the bit on a H55 hydraulic breaker but when

Customer Question

Trying to change the bit on a H55 hydraulic breaker but when trying to remove the pin it does not line up with the holes
Submitted: 6 months ago.
Category: Construction and Road Equipment
Customer: replied 6 months ago.
It is too high, we have released the pressure
Expert:  Bradley Martin replied 6 months ago.

Is the new bit same as the old bit? What is the serial number of this breaker?

Expert:  Bradley Martin replied 6 months ago.

Here is a procedure for installing a bit are you sure you have the right bit?

Related Construction and Road Equipment Questions