How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1149
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Working on a Pettibone 8044, have to reseal the 2 main Hd Cylinders

Customer Question

Working on a Pettibone 8044, have to reseal the 2 main Hd Cylinders for lift.
Any good suggestions to removing the pins in the frame that hold the cylinders.
Thanks NR
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 1 year ago.

I would set the boom on a sea container or something that you can rest it on to get under the boom to access the pins on under the boom take the hydraulic lines off to relieve the pressure on the cylinders the easiest one to get out will be the ones on the boom the bottom pins you may have to heat the frame around the pin to get them to come out let me know if you need anymore help.

Customer: replied 1 year ago.
Very disappointed with your response, you have obviously never worked on a Pettibone 8044
Expert:  Bradley Martin replied 1 year ago.

I have worked on multiple telehandlers what exactly do you need to know?

Related Construction and Road Equipment Questions