How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bradley Martin Your Own Question
Bradley Martin
Bradley Martin,
Category: Construction and Road Equipment
Satisfied Customers: 175
Experience:  Field Technician at Thompson Tractor Company
29889544
Type Your Construction and Road Equipment Question Here...
Bradley Martin is online now
A new question is answered every 9 seconds

Trouble codebF428 on my jd310sg backhoe JA: We'll do all

Customer Question

Trouble codebF428 on my jd310sg backhoe
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Construction Equipment Mechanic can help you best.
Customer: Just replaced the TPS and the CPU other codes that were present no longer coming up. Just the F428 code.
JA: Is there anything else the Construction Equipment Mechanic should be aware of?
Customer: Nope
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Construction Equipment Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 1 year ago.
Hello
F428 is a throttle position sensor error the only way to clear it is with John Deere service tool they will have to
Recalibrate the position sensor let me kn ow if you need anymore help

Related Construction and Road Equipment Questions