How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 4373
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
65405794
Type Your Construction and Road Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

John Deer 310 -E how to remove swing cylender

Customer Question

John Deer 310 -E how to remove swing cylender
Submitted: 8 months ago.
Category: Construction and Road Equipment
Expert:  Dan replied 8 months ago.
Hi Gary, My name is***** will be glad to help. What is your serial number?
Expert:  Dan replied 8 months ago.
Swing the boom opposite to the side you're removing and put all work equipment on the ground and bleed off excess pressure by working the levers after shutdown. Remove the swing cylinder pin retaining pin/rod to remove the cylinder pin. Once the front pin is removed, remove the plate that secures the swing cylinder pivot bushings , disconnect the lines and remove from the frame assembly. Let me know if you need more help

Related Construction and Road Equipment Questions