How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 4878
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
Type Your Construction and Road Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

Kubota 121-3 will not start when i turn key nothing happens

Customer Question

kubota 121-3 will not start when i turn key nothing happens if i push the thumb button by the hours the display comes up but stays on for a little bit even if you turn the key off
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Dan replied 1 year ago.

Hi Paul, Its Dan. What is your machine serial number? Test all your fuses for power on both sides with the key on by probing the top tabs of the fuse. Should have power on both sides for a good fuse. any fuses with power on only one side is faulty. If ok you could have a faulty relay, starter, ignition switch, or safety switch problem. Test for power at the starter solenoid small S terminal wire with someone turning the key into the start position. If there is power there , battery and cable connections are good, it means the starter is bad. Let me know

Related Construction and Road Equipment Questions