How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26033
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How would you measure a movement of 3/16 in the pitman arm

Customer Question

How would you measure a movement of 3/16 in the pitman arm and drag link attachment to the ball and socket joint?
Submitted: 8 months ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 8 months ago.

Set up a dial indicator and the movement can be measured in thousanths.

3/16 =0.1875 inch.

Expert:  Curtis B. replied 8 months ago.

Did you get it worked out?

Related Construction and Road Equipment Questions