How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 988
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a WA-180 3pt loader that won't start. It's not

Customer Question

I have a WA-180 3pt loader that won't start. It's not getting fuel. I have pumped and pumped the hand primer to try to bleed the air out of it, loosening the filters until we get good fuel coming out and we can even get fuel to the injection pump when we loosen the first bolt head on the pump. But when we try to start it and we crack an injector open we are getting no fuel at all coming out of the injectors. Is this bad pump for sure? Is there another fuel pump in the tank that could be malfunctioning?
Submitted: 9 months ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 9 months ago.

Are you getting fuel coming out of the injection pump?

Customer: replied 9 months ago.
nothing out of injection pump
Expert:  Bradley Martin replied 9 months ago.

If you fuel to the pump and nothing coming out of the pump. I would say the injection pump has failed.

Expert:  Bradley Martin replied 9 months ago.

Do you have power to the shut off solenoid?

Related Construction and Road Equipment Questions