How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 988
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My 1998 gradall 534d9-45 .. Is super slow .. Hydraulics work

Customer Question

My 1998 gradall 534d9-45 .. Is super slow .. Hydraulics work great it's just slow moving .. Was on a job main Hyd. Hose to valve body rusted n broke fluid poured out when hose was replaced it was cold out n machine wouldn't move for an hr when it finally did was slow as syrup .. Any thoughts ?
Submitted: 9 months ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 9 months ago.

Have you checked the brake pedal/ inching pedal? make sure the switch is not stuck behind the brake pedal if it is stuck try pulling it out and see how it drives

Related Construction and Road Equipment Questions