How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1022
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Where is the creep solenoid located

Customer Question

Where is the creep solenoid located
Submitted: 10 months ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 10 months ago.

creep solenoid on what type of machine?

Customer: replied 10 months ago.
John Deere 550h dozier
Sorry about that I had talked to another fellow about itThanks
Expert:  Bradley Martin replied 10 months ago.

oh that was me. is it still acting up?

Expert:  Bradley Martin replied 10 months ago.

creep solenoid is located on the hdryostat transmissio on the top i would just check all connections on top of the hydrostat

Customer: replied 10 months ago.
sir
Machine had shut down
You can shut it off then aas soon as you put it in gear throws the f311 code and won't move
Expert:  Bradley Martin replied 10 months ago.

ok under the floor plate should be you solenoids check the solenoids on top of the hydrostat make sure they have good connections and no corrosion or dirt

Related Construction and Road Equipment Questions