How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2245
Experience:  Field service technician for CAT 19 years.
11546476
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

Whay can cause a cat 416 bachoe to not engage in reverse

Customer Question

Whay can cause a cat 416 B bachoe to not engage in reverse sometimes?
Submitted: 11 months ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 11 months ago.

Hello,

Worn or incorrectly adjusted linkage to the transmission control valve. (Check linkage under floor plate. Remove joint and shift by hand to see if it has full travel)

Low fluid level. (Always check fluid with engine running and oil warm.)

Plugged strainer. (Drain oil and inspect for trash. Strainer is next to drain plug or on opposite side on some models. It has a small cover over it.)

Wrong oil. (Only use 30W transmission oil, never use ATF. CAT spec' TDTO or TO-4.)

Worn out transmission. ( Cut open old filter to inspect for debris. Metal of fiber from clutches will collect in filter.)

If you need further help, please include the full machine serial number with your reply.

Related Construction and Road Equipment Questions