How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cumminsdr Your Own Question
cumminsdr
cumminsdr, Mechanic
Category: Construction and Road Equipment
Satisfied Customers: 3544
Experience:  Cummins field tech
28984014
Type Your Construction and Road Equipment Question Here...
cumminsdr is online now
A new question is answered every 9 seconds

How can roll motor over in a case 580 CK that seems to be

Customer Question

How can roll motor over in a case 580 CK that seems to be locked up
Submitted: 11 months ago.
Category: Construction and Road Equipment
Customer: replied 11 months ago.
How can I get the motor to roll over?I have tools and big sockets and big breaker bars
Expert:  cumminsdr replied 11 months ago.

If it is hydraulically locked due to fuel or water on the piston than the injectors would need to be removed to evacuate the fluid on top of the piston.

If a bearing (rod/Main ) spun you must remove the oil pan and fine the failed bearing and remove it from the crank to rotate the engine.

If the piston seized to the cylinder wall you must remove the oil pan , find the failed piston remove the rod cap and remove the head to remove the piston

Expert:  cumminsdr replied 11 months ago.

Hi,Hope all went well, Just following up, Do you need more assistance?Please don't forget to rate my service.

Expert:  cumminsdr replied 11 months ago.

Please don't forget to rate my service

Expert:  cumminsdr replied 11 months ago.

Just following up, Please don't forget to rate my service

Related Construction and Road Equipment Questions