How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 8595
Experience:  worked on many road graders, Bull dozers , skid steers, Rollers
6825259
Type Your Construction and Road Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

Bob Dyer here I have and old 941 cat loader that has set

Customer Question

Customer: Bob Dyer here I have and old 941 cat loader that has set years and won't start but has fuel and hot battery....It ran well before being left idle... It turned rapidly and suddenly stopped turning.......the starter checks good....We took off the starter and turned the flywheel with a bar and it will only turn 180 degrees ?????
JA: Thanks. Can you give me any more details about your issue?
Customer: It turned rapidly and never fired before it hung up....it had lots of fuel and oil stick checked ok.....An old Cat mechanic said he thought the oil had to circulat in engine before fuel would go to the injector pump....Any ideas will be appreciated!!!!!
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $54) to post your type of question to Heavy Equipment Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: yes
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

what you are explaining sounds as if you have water or oil

on piston tops, causing a hydraulic lock

I suggest you remove the injectors, and spin engine over

see if oil/water pushes out injector port

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Expert:  Wayne replied 1 year ago.

Hi

Just following up with you

did my answer help you

let me know

Wayne

Related Construction and Road Equipment Questions