How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26051
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Curtis, On one of these Case 210 a error code is showing

Customer Question

Hi Curtis,
On one of these Case 210 a error code is showing 0113, I know it's an air heat sensor on the intake of some kind but, struggling to order the actual part as I do not have the precise name for it?
Submitted: 11 months ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 11 months ago.

?? 210 as Excavator or a Magnum farm tractor?

Expert:  Curtis B. replied 11 months ago.

EX210, MA210

Customer: replied 11 months ago.
Sorry, Case CX210B
Expert:  Curtis B. replied 11 months ago.

Part 797 ?

Expert:  Curtis B. replied 11 months ago.

Thanks.

Customer: replied 10 months ago.
Hi Curtis, going back to this one that loses power when crowding the dipper. I have today changed the filters, emptied the tank and cleaned it, taking off all fuel lines n banjo bolts n blew out. It still does it, when you bury the bucket into the quarry face and hold dipper closed you can here the hydraulics pulse twice then just hums the pulses again, it's to precise n consistent to be fuel I think, doesn't really do it so much on two higher throttle settings. Could it be the throttle control? It almost stalls engine if you lift machine off ground tipping it backwards as to sit it on counter weight. Doesn't really do it if continually worked.Any ideas
Expert:  Curtis B. replied 10 months ago.

Sorry, no help! Let me opt out so someone else can help!

Customer: replied 10 months ago.
Hi there, did anyone else have any ideas ?
Customer: replied 10 months ago.

Related Construction and Road Equipment Questions