How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 989
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a newly acquired Shaeff HT11 backhoe on a Unimog 406.

Customer Question

I have a newly acquired Shaeff HT11 backhoe on a Unimog 406. I do not see how to grease the swing cylinder pins. I partially removed the pins and could not find any grease galleries in either the pins or bushings. Is it possible the bushings are self lubricated? The backhoe is circa 1988 or thereabouts.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Dan replied 1 year ago.

Hi my name is***** will try to help. Could you upload picture of your backhoe setup and the pins in question? Use the paperclip icon to upload your saved photos

Related Construction and Road Equipment Questions