How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 988
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a D6k. no issues before, and the operator slammed the

Customer Question

i have a D6k. no issues before, and the operator slammed the right side door hard and it died. motor turns over fine, battery is good, but will not start.... any idea what to try?
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 year ago.

Hello, I am sorry no one could help you earlier. If you still need help I will be glad to assist you with this issue.

Your seat switch should show the operator is not present if that was the issue. I have not heard of this problem before and I am not sure how this would cause a problem with a door slam.

Your monitor can provide fault codes. To view the codes see the attached guide about retrieving the codes.

Record and post all the codes shown and identify which codes are active.

Please post the full machine serial number with your reply.

Related Construction and Road Equipment Questions