How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 26036
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Working on Dynapac CC-122 has no power steering is the large

Customer Question

working on Dynapac CC-122 has no power steering is the large hose of the bottom of the pump the feed hose or discharge hose.If feed hose then the hose and elbow on bottom of pump must be filled with fluid at all times correct or does the pump suck up fluid
every time you start engine thanks
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 year ago.

Yes, the large hose is the suction hose, it has to be vacuum tight. Each time engine is started , the pump has to suck the oil in. It should sty filled, but if there is a vacuum leak, it will leak back. Also the pump has to be in good shape to be able to draw the suction.

Expert:  Curtis B. replied 1 year ago.

Check the big hose and the fitting at both ends and the mounting flange and o'ring.

Related Construction and Road Equipment Questions