How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dieseldan55 Your Own Question
dieseldan55
dieseldan55, Mechanic
Category: Construction and Road Equipment
Satisfied Customers: 733
Experience:  Road Mechanic for Volvo Construction Equipment.
11640745
Type Your Construction and Road Equipment Question Here...
dieseldan55 is online now
A new question is answered every 9 seconds

Have a WA 320 will not start have replaced the main solenoid

Customer Question

have a WA 320 will not start have replaced the main solenoid don't wanna start no power to the key in the ignition switch
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dieseldan55 replied 1 year ago.

Hi my name is ***** ***** if you supply the serial number and dash series I will try to locate a achematic

Customer: replied 1 year ago.
Was 320_3MC A31471
Expert:  dieseldan55 replied 1 year ago.

So I would check for the slow blow fuse and the 10 amp fuse. They supply the power to the keyswitch.

Expert:  dieseldan55 replied 1 year ago.

see if this one comes out I'm having trouble getting this pic to print

Expert:  dieseldan55 replied 1 year ago.

did this info help?

Related Construction and Road Equipment Questions