How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85, Technician
Category: Construction and Road Equipment
Satisfied Customers: 506
Experience:  Service amanger for over 15 years
Type Your Construction and Road Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have a NH 8360 and the transmission pressure light keeps

Customer Question

Hi I have a NH 8360 and the transmission pressure light keeps coming on. From gear 5 to 4 it struggles to change gear like load is applied when you change ! And also the light comes on every time changing between gear 5 to 4 just wondered if you could help ? Thanks.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dd85 replied 1 year ago.
Well first try calibration the transmission
Customer: replied 1 year ago.
Ok thanks do you have a calibraration procedure for this tractor thanks.
Expert:  dd85 replied 1 year ago.
You may need this one also. If the transmission clutches are out of calibration it causes the low pressure when shifting,
Expert:  dd85 replied 1 year ago.
Did the calibration give any errors codes?

Related Construction and Road Equipment Questions