How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dieseldan55 Your Own Question
dieseldan55
dieseldan55, Mechanic
Category: Construction and Road Equipment
Satisfied Customers: 733
Experience:  Road Mechanic for Volvo Construction Equipment.
11640745
Type Your Construction and Road Equipment Question Here...
dieseldan55 is online now
A new question is answered every 9 seconds

How do you remove the pulley from the water pump on a 4400

Customer Question

How do you remove the pulley from the water pump on a bm 4400 volvo loader
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dieseldan55 replied 1 year ago.
Hello, not sure of the engine in this old machine the online is limited. Looking at the parts breakdown listed here, You will need to remove the snap ring 13 and then use a puller on the pulley hub to pull upwards to remove from pump shaft. Hope this breakdown will help sort it out for you. thanks, Dan
Expert:  dieseldan55 replied 1 year ago.
Hello, if this has helped you please rate my answer so I will get credit for my assistance. If you still have questions please follow up. Thanks, Dan.

Related Construction and Road Equipment Questions